KBVISION KX-A2112N2 2 MP Eyeball IP Camera
2 MP eyeball IP camera with a fixed 3.6 mm lens, 30 m infrared illumination and PoE input.
verified Key Technical Highlights
- check_circle Housing: Eyeball
- check_circle Resolution: 2 MP; 1,920 × 1,080
- check_circle Lens: 3.6 mm fixed
- check_circle Infrared: Up to 30 m
Overview
In retail showrooms, lift lobbies, and sheltered building eaves, installers need a discreet ceiling-mounted camera that resists humidity and sustains clean night visibility. The KBVISION KX-A2112N2 uses a compact IP67 Eyeball turret enclosure with a 2 MP (1920 × 1080) sensor, fixed 3.6mm lens, 30m infrared illumination, H.265/H.264 compression, and 12V DC or 802.3af PoE power. Be sure to note that the KX-A2112N2 is physically an Eyeball dome turret—contrary to legacy category URLs containing 'bullet'—so ceiling junction bases can be planned cleanly.

Clarifying physical housing: KX-A2112N2 is a compact Eyeball turret
Although an older catalog slug references 'bullet', official OEM datasheets and chassis specifications establish that the KX-A2112N2 is an Eyeball turret camera rather than an elongated tube housing.
Compared with conventional polycarbonate bubble domes, an Eyeball eyeball-and-collar design isolates the IR emitter ring cleanly from the imaging lens, helping reduce internal infrared haze as dust settles on outdoor eaves.
Three practical deployment roles and H.265 NVR retention benefits
Its 3-axis ball gimbal mounts straight onto horizontal ceilings or vertical walls while maintaining a level horizon over point-of-sale counters and doorway corridors.
Pairing H.265 output with a compatible NVR cuts storage bandwidth needs noticeably compared with legacy H.264 streams without overloading modest office switches.

- Scenario 01 — Showroom & POS floor ceiling coverage: Compact three-axis Eyeball turret sits flush on gypsum or metal ceilings, leveling cleanly over checkout desks and aisle displays without protruding wall arms.
- Scenario 02 — Semi-outdoor lobbies & sheltered eaves (IP67): IP67 weatherproofing combined with 30m IR sustains clear monitoring under humid entrance canopies and semi-open parking corridors.
- Scenario 03 — Bandwidth-friendly H.265 & single-drop 802.3af PoE: H.265 encoding trims NVR drive consumption while a single Cat6 run carries 802.3af PoE (or 12V DC locally), terminating pigtails neatly inside recessed junction mounts.
Junction mount finishing, 3.6mm optics, and impact rating limits
While IP67 keeps water and dust out of electronics, its datasheet does not claim IK10 vandal resistance. For low public ceilings under 2.4m vulnerable to intentional strikes, choose an IK10 polycarbonate dome model instead.
Where ceiling plenums are tight or concrete slabs offer no cavity, add a round junction back-box so pigtails never hang exposed outside the mounting base.
Selection boundaries and acceptance checklist
When this model fits
- Retail stores, clinics, office corridors, or sheltered building canopies needing a neat 2 MP Eyeball camera with IP67 sealing.
- NVR setups utilizing H.265 compression and 802.3af PoE cabling.
When to choose another approach
- Public low-clearance walkways requiring certified IK10 impact protection.
- Severe backlit glass vestibules requiring 120dB true WDR or remote varifocal zoom.
Verify before ordering
- Gypsum grid vs concrete slab mount type to include matching round back-boxes for pigtail storage.
- 3.6mm coverage cone at planned ceiling height across point-of-sale cash drawers and entry thresholds.
- NVR support for H.265 decode and aggregate 802.3af PoE switch power across all cameras.
Site acceptance checks
- Confirm level camera horizon after locking the 3-axis collar under both daytime lighting and 30m night IR.
- Verify H.265 recording stream health on the NVR and clean PoE port recovery after power cycling.
- Inspect ceiling penetrations and junction bases to confirm zero visible slack pigtails.
Share your showroom ceiling layout or corridor lengths with VinaTech Telecom to plan camera counts, junction boxes, and NVR capacity for KBVISION KX-A2112N2.
Manufacturer documentation: KBVISION — KX-A2112N2 Eyeball IP Camera Datasheet
Technical Specifications
| Lens | 3.6 mm fixed |
| Power | 12 V DC / PoE 802.3af |
| Housing | Eyeball |
| Infrared | Up to 30 m |
| Resolution | 2 MP; 1,920 × 1,080 |
| Compression | H.265 / H.264 |
| Housing protection | IP67 |
Documents
Product questions and answers
Why does an older URL mention bullet while the KX-A2112N2 datasheet shows an Eyeball?
The older URL slug had swapped terminology, whereas the actual OEM specification and physical camera chassis are confirmed as an Eyeball dome turret (opposite the KX-A2111N2 Bullet).
Is the KX-A2112N2 suitable under covered outdoor canopies?
Yes. Its IP67 rating resists moisture and dust under covered overhangs, provided the rear RJ45 pigtail sits inside a sealed back-box or dry ceiling cavity.
Can the KX-A2112N2 work with older H.264-only NVRs?
Yes, you can configure its stream profile to H.264 for legacy NVRs, though storage consumption will be higher than H.265.